CALL@91-9811540788 signalboosterdealer in Mumbai, Signal booster installation service in Mumbai, Navi Mumbai, Thane & Palghar area.
Mobile signal booster Manufacturer and Dealer in Mumbai & Thane area.
All networks device available at wholesale price 2G, 3G, 4G and 5G devices with jio Network. PAN india signal booster free delivery with 2 years product warranty.
signal booster installation Mumbai https://signalboosterdealer.com/
Working process of Mobile network Booster –
Does your home not get a mobile signal booster? If you have a mobile in the office or in the basement, then there is a proper solution for this. If the signal is not reaching properly in your basement, ground floor, first floor or inside, then you can install a network booster there. The work of the network booster is to transfer the signal that comes above your floor downwards. The signal booster does not create any network of its own. Whatever signal is received above the floor, an antenna is installed there which is called an open antenna or LD antenna. The antenna will come above the floor, it will take down the signal strength, a device is installed below and the antenna is installed near the device. The signal strength will come to your floor and will provide complete signal on your floor. The mobile network booster is basically for calling. You can use the internet normally with it. If you think that it will provide 5G speed or 20mb 25mbps speed, then this is not the work of the booster. For this, you have to use a WiFi router from which you can make proper calls. You will not face any problem in calling. You can also install 2G device, 3G, 4G and 5G Jio and the in-one device that comes in it is 3G, 4G and if you want to install Jio device, then the 2G device is different.
Components and parts of mobile signal booster-
The 2G device provides you only 2G i.e. GM signal. It provides network only for tele sales or for keypad phones etc. or tele calling etc. which you keep in office etc. because in today’s time everyone is using Android phone or Apple etc. Therefore, mostly 4G 5G and Jio network boosters are being installed now. If you want Jio devices then you have to order them specially on demand from the company and 3G 4G and 5G devices can be installed anywhere in shops or hospitals. Basically where the area is large, the height of the building is very high, there are tall buildings where the network cannot reach below, basically it is required only there where you can get full signal. After installing this device and you do not face any problem in calling, its basic parts are antenna, device and its connectors.
Basically it has three types of wire, first there is wire in LMR 300 and LMR 400 which is used for residential and commercial devices.
Installing a mobile signal booster involves a few steps to ensure proper setup and improved signal strength. Here’s a guide to help you:
1. Understand the Components
- Outdoor Antenna: Captures the mobile signal from the nearest tower.
- Signal Booster Unit: Amplifies the signal.
- Indoor Antenna: Distributes the amplified signal inside your home or office.
- Cables: Connect the antennas and booster.
2. Find the Best Outdoor Signal
- Use your phone to check for the area with the strongest mobile signal (usually outdoors, near windows, or on rooftops).
- The booster requires at least one or two signal bars to amplify.
3. Install the Outdoor Antenna
- Place it in a location with the best signal, like the roof or an elevated area.
- Ensure it points toward the nearest mobile tower.
- Secure the antenna properly to withstand weather conditions.
4. Connect the Booster Unit
- Use the provided cable to connect the outdoor antenna to the input port of the signal booster.
- Place the booster in a central indoor location for better signal distribution.
5. Install the Indoor Antenna
- Position it where you need the signal most, like in a living room or office.
- Use the cable to connect the indoor antenna to the output port of the booster.
6. Power On and Test
- Plug the signal booster into a power outlet.
- Check the signal strength on your phone to ensure the booster is working.
7. Adjust if Necessary
- If the signal is not improving, reposition the outdoor antenna for better reception.
- Maintain proper separation (at least 20 feet) between the outdoor and indoor antennas to avoid interference (oscillation).
- Follow the manufacturer’s guidelines for specific instructions.
- Check with local authorities or service providers to ensure your booster is legal and compatible with your network.